debian 安装蓝牙鼠标

安装驱动 apt-get install bluez-utils /etc/init.d/bluez-utils restart

启动服务并搜索蓝牙设别（这时需要按一下蓝牙鼠标的connect键）

sudo hidd –server sudo hidd –search

一会你就可以看到这个设备的MAC码　xx:xx:xx:xx:xx:xx

修改　/etc/default/bluetooth sudo vi /etc/default/bluetooth

注意下面红色的地方，那里改成你鼠标的MAC码，然后保存

# Defaults for bluez-utils

# This file supersedes /etc/default/bluez-pan. If # that exists on your system, you should use this # file instead and remove the old one. Until you # do so, the contents of this file will be ignored.

# start bluetooth on boot? # compatibility note: If this variable is not found bluetooth will # start BLUETOOTH_ENABLED=1

# This setting will switch HID devices (e.g mouse/keyboad) to HCI mode, that is # you will have bluetooth functionality from your dongle instead of only HID. # Note that not every bluetooth dongle is capable of switching back to HID # mode, see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=355497 HID2HCI_ENABLED=1

############ HIDD # # HID daemon HIDD_ENABLED=1 HIDD_OPTIONS=”–connect AA:BB:CC:DD:EE:FF –server” # to make hidd always use a particular interface, use something # like this, substituting the bdaddr of the interface: # HIDD_OPTIONS=”-i AA:BB:CC:DD:EE:FF –server”

设置开机自动连接鼠标，编辑rc.local

$ sudo gedit /etc/init.d/rc.local

在后面加上

hciconfig hci0 down hciconfig hci0 up hidd –search

保存

大功告成，重启动下你的计算机看看，是不是可以用啦。